COATS 9500R Electro-Hydraulic Tire Changer User Manual
Page 20
Advertising
5. Place the hook tool between bead and rim
(fig.44).
Fig.44
6. Lift the chuck arm to move the hook tool away
from the rim edge (1” or 2-3 cm).
Move the tool towards the outside to apply the long
tire bar (fig.45).
Fig.45
7. Turn the chuck counterclockwise until the outer
bead is completely demounted (fig.46).
Fig.46
8. If the tire is tube-type, push the valve stem to-
wards the inside of the rim.
9. Lift the tool holder arm to the rest position.
Shift the tire from the rim, moving the tool holder car-
riage towards the outside: This will make it much eas-
ier to remove the tube (fig.47).
Fig.47
16 • COATS 9500R Tire Changer
Tire Tool
Advertising