Warning, 0 introduction – COATS 9500R Electro-Hydraulic Tire Changer User Manual

Page 5

Advertising
background image

COATS 9500R Tire Changer • 1

1.0 Introduction

Congratulations on purchasing the COATS

®

9500R

Electro-Hydraulic Tire Changer.

This tire changer is designed for ease of operation,

safe handling of rims, reliability and speed.

With a minimum of maintenance and care, your tire

changer will provide many years of trouble-free opera-
tion.

Instructions on use, maintenance and operational

requirements of the machine are covered in this man-
ual.

Store this manual in a convenient place for
future reference. Read this manual thor-
oughly before using the machine.

1.1 Use limitations

The COATS model 9500R tire changer is intended to

be used as a device to demount and mount tubeless
truck tires with the following specifications:

Maximum Tire Diameter:

90 1/2 inches (2300 mm)

Maximum Tire Width :

55 inches (1400 mm)

This device shall be used in the application for which

it is specifically designed. Any other use shall be con-
sidered as improper, and NOT WITHIN THE SPECIFI-
CATIONS OF THIS UNIT. In particular, this device is not
suitable to inflate tires. Inflation of tires shall be carried
out in an approved inflation safety cage. The manufac-
turer shall not be considered liable for possible damage
caused by improper, wrong or non-SPECIFIED use.

1.2 Notice

This manual is a part of the product. Read carefully

the warnings and instructions of this manual since they
provide important information concerning safety and
maintenance.

1.3 General Safety Instructions

Any misuse or modification of this device or of its

parts or components not previously authorized by the
manufacturer relieves the manufacturer from any dam-
age consequent or related to the above mentioned
misuse.

No modifications should be made without consulting

COATS

®

. Removing or bypassing any safety devices or

warning labels of the machine is a violation of the
safety regulations.

The use of this device is allowed only in locations

with no explosion or fire hazards, consistent with state
and local fire codes.

This equipment is designed to use original or manu-

facturer supplied spare parts and accessories only.

The installation shall be carried out only by qualified

personnel and within the scope of the instructions pro-
vided in this manual.

Check for possible dangerous conditions during the

operation of the machine. If such a case exists stop the
machine immediately. In case a defective functioning
condition stop using the machine, immediately and call
the authorized distributor for assistance.

All electrical connections shall be per-
formed by a licensed electrician. All service
must be performed by an authorized service
technician.

1.4 Nomenclature

Before installing and using the tire changer it is sug-

gested that you become familiar with the nomencla-
ture of the machine’s components (fig.1).

Fig.1

1 - 8 Position Switch
2 - Chuck Switch
3 - Emergency Stop
4 - Tool Holder Arm
5 - Main Switch
6 - Tool Holder Carriage
7 - Foot Board
8 - Jaws
9 - Self-centering Chuck

10 - Chuck Arm

11 - Chuck Rotation Control Pedal

12 - Mount/Demount Tool
13 - Electric Cabinet
14 - Tool Holder Arm & Release

WARNING

WARNING

Advertising