Brother DCP-540CN - Manual (Page 14)

8
2
Loading documents
2
You can make copies, and scan from the ADF
(automatic document feeder) and from the
scanner glass.
Using the ADF
(DCP-540CN only)
2
The ADF can hold up to 10 pages and feeds
each sheet individually. Use standard
80 g/m
2
(20 lb) paper and always fan the
pages before putting them in the ADF.
Recommended environment
2
Document Sizes Supported
2
How to load documents
2
CAUTION
DO NOT pull on the document while it is
feeding.
DO NOT use paper that is curled, wrinkled,
folded, ripped, stapled, paper clipped,
pasted or taped.
DO NOT use cardboard, newspaper or
fabric.
Make sure documents written with ink are
completely dry.
a
Fan the pages well. Make sure you put
the documents face down, top edge
first in the ADF until you feel them touch
the feed roller.
b
Adjust the paper guides to fit the width of
your documents.
c
Unfold the ADF Document Output
Support Flap (1).
CAUTION
DO NOT leave thick documents on the
scanner glass. If you do this, the ADF may
jam.
Using the scanner glass
2
You can use the scanner glass to copy or
scan pages of a book or one page at a time.
Document Sizes Supported
2
Loading documents and paper
2
Temperature: 20 to 30 ° C (68 to 86° F)
Humidity: 50% to 70%
Paper:
80 g/m
2
A4 (20 lb LTR)
Length: 148 to 355.6 mm (5.8 to 14 in.)
Width: 148 to 215.9 mm
(5.8 to 8.5 in.)
Weight:
64 to 90 g/m
2
(17 to 24 lb)
Length: Up to 297 mm (11.7 in.)
Width: Up to 215.9mm (8.5 in.)
Weight: Up to 2 kg (4.4 lb)
1