Brother DCP-540CN - Manual (Page 35)

Making copies
29
4
Setting your changes as a
new default
4
You can save the copy settings for Quality,
Paper Type
, Brightness, Contrast and
Color Adjust that you use most often by
setting them the default settings. These
settings will stay until you change them again.
a
Press a or b to choose your new
setting.
Press OK.
Repeat this step for each setting you
want to change.
b
After changing the last setting, press a
or b to choose Set New Default.
Press OK.
c
Press + to choose Yes.
d
Press Stop/Exit.
Restoring all settings to the
factory settings
4
You can restore all the settings you have
changed to the factory settings. These
settings will stay until you change them again.
a
Press a or b to choose
Factory Reset
.
Press OK.
b
Press + to choose Yes.
c
Press Stop/Exit.