COATS 6060 AX/EX Tire Changer - Manual (Page 2)

Table of Contents
Definitions of Hazard Levels ................................1
Owner’s Responsibility ........................................1
Principal Operating Parts .....................................2
Operating Instructions .........................................3
Bead Loosening and Demounting ....................3
Mounting ...........................................................6
Inflation ..................................................................7
Bead Sealing ....................................................7
Bead Seating ....................................................8
Inflation .............................................................8
Performance, Custom, and Aluminum Wheels ..9
Aluminum and Custom Wheels ........................9
Performance Tires and Wheels • Demounting .9
Performance Tires and Wheels • Mounting ....11
Custom and Special Wheels ..............................12
Tube Type Tires ..................................................12
Stages of Inflation ...............................................13
Bead Seal .......................................................13
Bead Seat .......................................................13
Inflation ...........................................................13
Mis-Matched Tires and Wheels ..........................13
Maintenance Instructions ...................................14
Installation Instructions .....................................15
Critical Safety Instructions .................Back Cover
Failure to follow danger,
warning, and caution
instructions may lead to
serious personal injury or death to operator or
bystander or damage to property. Do not operate
this machine until you read and understand all
the dangers, warnings and cautions in this
manual. Download a copy of the manual from
our website at www.ammcoats.com, or for
further information, contact:
Hennessy Industries, Inc.
1601 J.P. Hennessy Drive
LaVergne, TN 37086-3565
(615) 641-7533 or (800) 688-6359
www.ammcoats.com
WARNING
Operator Protective Equipment
Personal protective equipment helps make tire
changing safer. However, equipment does not take
the place of safe operating practices. Always wear
durable work clothing during tire service activity.
Shop aprons or shop coats may also be worn,
however loose fitting clothing should be avoided.
Tight fitting leather gloves are recommended to
protect operator’s hands when handling worn tires
and wheels. Sturdy leather work shoes with steel
toes and oil resistant soles should be used by tire
service personnel to help prevent injury in typical
shop activities. Eye protection is essential during
tire service activity. Safety glasses with side
shields, goggles, or face shields are acceptable.
Back belts provide support during lifting activities
and are also helpful in providing operator
protection. Consideration should also be given to
the use of hearing protection if tire service activity
is performed in an enclosed area, or if noise levels
are high.
For additonal tire, wheel, and/or inflation information
contact the following:
RUBBER MANUFACTURERS ASSOCIATION
1400 K Street N.W.
Washington, DC 20005
(202) 682-4800
www.rma.com
TIRE GUIDES, INC.
The Tire Information Center
1101-6 South Rogers Circle
Boca Raton, FL 33487-2795
(561) 997-9229
www.tireguides.com