Comark KM340 User Manual
Page 5
4
ENGLISH
KM340 DIGITAL THERMOMETER
OPERATING INSTRUCTIONS
1. GENERAL INFORMATION
It is recommended that you read the safety and operation
instructions before using this instrument.
WARNING
TO AVOID ELECTRIC SHOCK DO NOT ALLOW
ANY PROBE OR SENSOR TO COME INTO
CONTACT WITH LIVE ELECTRICAL POWER
CONDUCTORS WITH VOLTAGES IN EXCESS OF
30V AC RMS OR 60V DC.
TO AVOID DAMAGE OR BURNS, DO NOT
MAKE TEMPERATURE MEASUREMENTS IN
MICROWAVE OVENS.
THE SYMBOL ON THE INSTRUMENT
INDICATES THAT THE OPERATOR MUST REFER
TO THE WARNINGS GIVEN HERE.
CAUTION
Temperature Measurement Probes
This precision instrument has been designed for use
with the extensive range of Comark temperature probes.
The use of other probes may impair the performance and
accuracy of the instrument. Full details of Comark probes
and sensors can be obtained from Comark Customer
Support department or your local distributor.
Repeated sharp flexing can break thermocouple probe
leads. To prolong lead life, avoid sharp bends or kinks in
the leads, especially near the connector.