Comelit MT 3451 - Manual (Page 24)

24
SELECT LANGUAGE
SECOND LANGUAGE
CALL MANAGEMENT
ACCESS CONTROL
OK OK
SCROLL ESC
EN
3. Select:
YES
NO (default)
4. Confi rm.
2.6. Access control
1. Access programming mode, see page 17.
2. Select settings/access control.
Art. 3451 can operate in two modes:
• "access
control" disabled: in this mode, every name can be
assigned a call code, which is saved in the directory. The entry
passwords must be entered separately and are not assigned to
any name.
• "access control" enabled: in this mode, a call code, an indirect
code (only in case of indirect call), a password and an RFID key
can be saved for every name listed in the directory. The option of
assigning a password or key to a name allows access identifi cation.
When access control is enabled, the following cannot be used:
• Immotec call mode
• data loading from 1249B (R.I. 003 - SW rev. 2.3 or higher)
To switch from "access control" disabled to "access control"
enabled, all saved passwords must be deleted
To switch from "access control" enabled to "access control"
disabled, all saved passwords and keys must be deleted
CALL USER
_ _ _ 100
CALL CANC
The call can be made in the following ways:
√ During normal operation
1. Enter the indirect code (e.g. 100).
2. Press
to make the call or to cancel and exit.
or:
1. Scroll through the directory using .
2. Press to make the call or to exit.
CALL USER
_25 015
CALL CANC
In this mode, the user is identifi ed by a name fi eld and a code fi eld
no longer than 3 digits (between 1 and 240).
In this mode, the user is identifi ed by the name fi eld (optional) and
a code fi eld consisting of two parts:
zone fi eld with no more than 3 digits (between 1 and 500);
user fi eld which must have 3 digits (between 1 and 240).
Example:
Example:
User name= Mario Rossi
Code= 2
User name= Mario Rossi
Code= 25 015
The call can be made in the following ways:
√ During normal operation
1. Enter the user code (e.g. 25 015).
2. Press
to make the call or to cancel and exit.
STANDARD - SIMPLEBUS (default)
STANDARD - SIMPLEBUS TOP
In this mode the user is identifi ed by a name fi eld (optional), a code
fi eld (different for Simplebus and Simplebus Top) and an indirect
code with no more than 6 characters.
Example:
User name= Mario Rossi
Code= 2 (for Simplebus) or 25 015 (for Simplebus top)
Indirect code= 100
INDIRECT CODE - SIMPLEBUS or SIMPLEBUS TOP
or:
1. Scroll through the directory using .
2. Press to make the call or to exit.