Comelit MPTZ766A - Manual (Page 33)

27
• SYSTEM MENU
SYSTEM MENU
MOTOR SETUP
PASSWORD EDIT
ORIGIN CHECK
WHITE DEFECT COMPENSATION
CALIBRATION : ON
PASSWORD ENABLE : OFF
BLINK CURSOR : ON
DOME ANSWER : ON
SAVE AND EXIT(ESC TO CANCEL)
CALIBRATION : ON(Auto origin check) / OFF
PASSWORD ENABLE : ON(requires the password to enter menu) / OFF
BLINK CURSOR : ON / OFF(no blinking cursor)
DOME ANSWER : ON / OFF(no acknowledge command from the dome)
This option is helpful to escape the collision of the command using some DVR.
MOTOR SETUP
Motor Setup menu provides the pan and tilt speed of a camera. User can set the desired
speed with pushing the Joystick to the left or right. During operation, pressing 153 + ON keys
will change the speed to the SLOW mode and pressing 153 + OFF keys will change the speed
to the Normal mode.
Press and hold the CTRL key and moving the Joystick will operate with the TURBO speed
mode.
MOTOR SETUP
PROPOTIONAL P/T : ON
P/T MODE : NORMAL
SAVE AND EXIT(ESC TO CANCEL)
PROPOTIONAL P/T : ON / OFF
P/T MODE : SLOW / NORMAL / TURBO
SLOW MAXIMUM SPEED : 40 ˚ /second
NORMAL MAXIMUM SPEED : 90 ˚ /second
TURBO MAXIMUM SPEED : 240 ˚ /second
PASSWORD EDIT
PASSWORD EDIT SETUP
(CTRL KEY)
INPUT PASSWORD
PASSWORD :
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z 0 1 2 3
4 5 6 7 8 9 ( )
SAVE AND EXIT(ESC TO CANCEL)