CounterPath Bria 3.0 for Windows User Guide – Retail Deployments - Manual (Page 63)

Bria 3.0 for Windows User Guide – Retail Deployments
59
Preferences – Devices
Bria automatically detects devices at each startup, and selects the most appropriate device for each purpose. If
you do not like this selection, you can override it on this panel.
If you override a selection, it will apply the next time you start Bria, unless the device is no longer available, in
which case Bria will again select the device to use.
Table 10: Preferences – Devices
Field Description
Headset Mode
Speaker
Microphone
Change these fields only if you want to override the devices that Bria automatically selected.
In both these fields, select the headset you are using.
The headset is the device that is usually used for audio out (the sound you hear) and audio in
(recording your voice). The only situation in which the headset is not used is when the Speaker
Phone button on the dialpad is pressed.
Therefore, unless you will always be using Bria in speakerphone mode, you must make a selection
here.
Select the headset in both the Speaker device field and Microphone device field.
HID Device If the selected headset device is a HID-compliant device, this field specifies that device. You can
click Setup in order to assign functions to the device. For example, you can set the green button so
that it answers an incoming call.