CounterPath Bria 3.5 Administrator Guide User Manual
Page 8
CounterPath Corporation
4
1.3 Deploying through Manual Configuration:
Recommended Procedure
If you have chosen to manually configure Bria and will not implement remote provisioning, read this entire
manual.
If you are a service provider, you should be aware that if you deploy through manual configuration then users
do not log in, which exposes your service to abuse and may compromise the user’s privacy.
It is assumed that you, the administrator, will be exploring deployment strategies using Bria for Window.
Therefore, instructions in this section are for Bria for Windows only.
Configuring Bria: Administrator Steps
The general procedure is:
1.
Install and start Bria. The Bria Login dialog appears with the Profile set to “Manually enter login server”.
Set the profile to “No login required” and click Continue. The softphone GUI appears.
2.
Configure Bria to work on your network and with your services. Use the Account Settings window
(Softphone > Accounts) and the Preferences window (Softphone > Preferences).
The Troubleshooting Assistant (Help > Troubleshooting) may help you identify problems with your
configuration.
The rest of this manual describes this configuration.
3.
When you are satisfied with the configuration, deploy to your employees or users.
4.
Then either configure the application for each employee, or provide them with a list of settings so that they
can configure it themselves (see page 51 for a sample form).