CounterPath Bria BlackBerry Edition User Guide - Manual (Page 29)

Bria BlackBerry Edition User Guide
25
Account Advanced (SIP)
Top of Screen Middle of Screen Bottom of the Screen
Field Description
Out. Proxy If your VoIP service provider has an outbound proxy and requires that you provide that address to
Bria, enter the domain name or the IP address obtained from your provider.
Auth Name May not be required. But if it is required, it will be provided by your VoIP service provider.
Send DTMF using The method used for DTMF, sent when you press a number key when dealing with an auto
attendant (such as “press 1 for customer service
” ). RFC 2833, SIP INFO and Inband DTMF are
supported.
Choose a method specified by your VoIP service provider.
Suppress STUN Wi-Fi Allows you to control the use of STUN per account.
• ON: No STUN is used on this particular account. This setting overwrites the STUN Wi-Fi
setting under Advanced Settings (which applies to all accounts); when Suppress STUN Wi-Fi
is ON, no STUN is used on this particular account even if STUN is enabled under Advanced
Settings.
• OFF (default): Bria decides whether to use STUN or not depending on the STUN Wi-Fi setting
under Advanced Settings.
Suppress STUN Mobile This setting has the same function as Suppress STUN Wi-Fi, but applies only when you are
connected over the mobile network.
Use ICE Wi-Fi ICE is involved only in media routing (it is not involved in SIP signaling).
ON: Bria will use ICE to discover addresses for media packets. ICE provides a good guarantee of
two-way audio. However, to use ICE successfully, both endpoints in a call must use ICE and
specifically must use draft 19 of the ICE standard.
OFF: Try turning ICE off if you are not using BlackBerry device behind a firewall or NAT.
Use ICE Mobile This setting has the same function as ICE Wi-Fi, but applies only when you are connected over
the mobile network.