CounterPath Bria BlackBerry Edition User Guide - Manual (Page 33)

Bria BlackBerry Edition User Guide
29
Network Traversal Strategy
Select a profile:
• Application Managed: STUN Wi-Fi ON, STUN Mobile OFF, and DNS SRV
ON.
Bria will use the specified STUN server to discover the public address of your
device. It will present your public address for SIP signaling. When negotiating
media routing, it will present either both your public and private addresses or
just your public address depending on the ICE settings under Account
Advanced .
• Server Managed: STUN OFF and DNS SRV ON.
Bria will present your device’s private address for SIP signaling and when
negotiating media routing. Choose this option if your VoIP service provider
advises you that it has implemented a network-hosted NAT traversal (or far-
end NAT traversal) technology such as a session border controller (SBC),
media proxy or RTP relay.
• Custom Configuration: Set the settings as desired.
Field Description
DNS SRV • ON: Bria will use DNS SRV to discover the network addresses for your VoIP service
provider's VoIP-related services such as a STUN server, if any.
• OFF: Bria will not use DNS SRV for discovery. Only turn this setting off if your system
administrator advises you to do so.
STUN Server Used only if STUN is ON. The default is stun.counterpath.com but we recommend that you
change this to an address provided by your VoIP service provider. CounterPath cannot
guarantee the availability of their STUN server.
STUN Wi-Fi • ON: Bria will use a STUN server to discover your public IP address.
• OFF: Bria does not discover your public IP address. Therefore, only the private IP address
will be used. Typically, Global IP should be set to OFF to assure that the private IP address is
used for SIP signaling.
STUN Mobile This setting has the same function as STUN Wi-Fi, but applies only when you are connected
over the mobile network.