CounterPath Bria Android Edition 2.2 User Guide - Manual (Page 46)

CounterPath Corporation
42
Account Advanced (SIP)
Field Description
Outbound Proxy If your VoIP service provider has an outbound proxy and requires that you provide that address to
Bria, enter the domain name or the IP address obtained from your provider.
Authorization Name May not be required. But if it is required, it will be provided by your VoIP service provider.
Send DTMF using The method used for DTMF, sent when you press a number key when dealing with an auto
attendant (such as “press 1 for customer service”).
Enter the value specified by your VoIP service provider: RFC 2833, SIP Info, or Inband DTMF.
If DTMF tones are not being recognized, trying the other method may resolve the issue. If DTMF
is still not working, contact your VoIP service provider for information about DTMF and IVR.
Also Send Inband DTMF This applies when RFC2833 or SIP Info is selected as a DTMF method.
When On, inband DTMF is sent in addition to the other two methods (RFC 2833 or SIP Info)
chosen above.
Suppress STUN Wi-Fi Allows you to control the use of STUN per account.
• On: No STUN is used on this particular account. This setting overrides the STUN Wi-Fi
setting under Advanced Settings (which applies to all accounts); when Suppress STUN Wi-Fi
is ON, no STUN is used on this particular account even if STUN is enabled under Advanced
Settings.
• Off (default): the app decides whether to use STUN depending on the STUN Wi-Fi setting
under Advanced Settings.
Suppress STUN Mobile This setting has the same functionality as Suppress STUN Wi-Fi, but applies only when you are
connected over the mobile network.
Use ICE Wi-Fi ICE is involved only in media routing (it is not involved in SIP signaling).
ON: Bria will use ICE to discover addresses for media packets. ICE provides a good guarantee of
two-way audio. However, to use ICE successfully, both endpoints in a call must use ICE and
specifically must use draft 19 of the ICE standard.
OFF: Try turning ICE off if you are not using Android phone behind a firewall or NAT.
Use ICE Mobile This setting has the same function as ICE Wi-Fi, but applies only when you are connected over
the mobile network.
Global IP Wi-Fi • On (checked): Bria will publish its public IP address at the signaling level. The public address
may not work with some NATs or firewalls.
• Off: Bria will publish its private IPs at the signaling level. Typically, you turn this field off
only if instructed to do so by your VoIP service provider or system administrator.