CounterPath Bria Android Edition 2.2 User Guide - Manual (Page 7)

Bria Android Edition User Guide
3
2 Configuring Bria
We strongly recommend that you perform your initial setup from within a “known” network, such as in
your enterprise or university campus Wi-Fi zone or within range of your home network (if you have
one) and not in a network such as an internet cafe.
2.1 Getting Ready
1. Set up Wi-Fi connection. From the main phone screen, tap Settings > Wireless & networks, and look at the
Wi-Fi field:
• If it has a checkmark and a message such as “Connected to MyEnterprise”, then your phone has a Wi-
Fi connection. Go to the next step.
• If it has no checkmark and the line “Turn on Wi-Fi”, then tap the field to turn on Wi-Fi and wait for the
message “Connected to MyEnterprise”
• If the message does not appear, tap Wi-Fi settings (the next field). On the Wi-Fi settings screen, tap the
desired network and complete the popup that appears. The message “Connected” will appear.
You can connect to as many networks as you want. Whenever you move into range of one of these
networks (and assuming you are not already connected elsewhere), you will automatically connect to
that network.
2. Set up mobile data connection (if applicable). From the main phone screen, tap Settings > Wireless &
networks, and then tap Mobile networks. Make sure:
• Data enabled is On
• Use only 2G networks is Off (in order to enable 3G).
3. Let Bria use mobile data when no Wi-Fi is available. To do so, launch Bria and go to Preferences and turn
on “Use When Available” and “Allow VoIP Calls”.
4. Obtain account information from your VoIP service provider.
• Your username, password and domain.
• Your autorization name, if used by your service provider.
• Your voicemail number, if your service provider provides this service.
5. Tap the Bria icon on the phone.
Indicates that there is a Wireless connection