Dascom DT-230 User Guide - Manual (Page 21)

Tally Dascom DT-210/230
10
1.8 Installing the accessory and optional kits
 Interface Cover
Adjust the relative positions between interface cover and printer as shown below, and push the
interface cover as arrow shows below.
 Splash Cover (Optional Kit)
Slip the fixed hooks on both sides of splash cover into the mounting hole on the printer, and close the
splash cover.
 Hanging Plate (Optional Kit)
1. Mount the hanging plate on the lower housing of the printer with screws ①;
2. Align the positioning holes of the hanging plate and plug into the fixed screws on the wall ②.