Dascom LA48N/LA48W User Guide - Manual (Page 28)

Setting up the printer
2-18
Operations of the control panel
This section summarizes status indications and operations of the control panel in
Normal mode. For details on Set-Up mode, see Chapter 5, “Using Set-Up Mode”.
Normal mode operation includes everyday operations, such as paper handling, macro
selection, and protocol selection. The first table lists basic states represented by the
Ready and Fault indicators. The second table lists Normal mode operations and re-
quired user response. Operations are listed by functions.
Control panel indicators and buttons
The control panel indicators display the state of the printer and the control panel but-
tons control the work with the printer.
Basic states of the printer
Indicator Status Printer status
Ready On The printer is ready for printing
or
The printer is receiving or printing data.
Blinking The printer is not ready and holds printing data.
Off The printer is not ready and it does not hold printing
data.