Dascom T2150S Quick Start Guide Cutter Option - Manual (Page 6)

Introduction Quick start guide
2
` Important safety
instructions
Read the following instructions carefully before putting the printer into operation
in order to protect yourself from injury and avoid damage to the device.
■ Keep this Quick start guide always readily accessible.
■ Avoid exposing the cut device to high temperature or direct sunlight.
■ Keep all liquids away from the cut device.
■ Do not expose the cut device to shock, impact or vibration.
■ Switch the printer off before removing any paper chips from the cut device.
■ Never insert any inappropriate material into the cut device in order to avoid
damage to the mechanical components.
Never try to carry out maintenance and repair work yourself; always call a
qualified service technician.
You will find additional safety information at specific places in the text.
STOP
Cutter-en.book Seite 2 Donnerstag, 3. Mai 2007 9:42 09