Dascom T2250 Quick Start Guide - Manual (Page 19)

➤ Paper transport Loaded paper can be transported in the printer in several ways.
Make sure that the printer is in offline mode; press the Online key, if
necessary
Key Park (1): If fanfold paper is loaded in the printer, it is fed to the tear
position. If a single sheet is loaded, it is ejected.
Key (2): Short keypress: Paper is transported upwards step by step
Long keypress: Continuous transport upwards
Key (3): Short keypress: Paper is transported downwards step by step
Long keypress: Continuous transport downwards
Key LF/FF (4): Short keypress: Line feed (LF) is executed
Long keypress: Form feed (FF) is executed
The maximum value of the paper return feed is 22 inches.
Offline Tractor1
Online
Setup
Park LF/FF
2 1 3 4 E
N
G
L
IS
H
Quick Start-up Paper handling
17