Tally dascom 2610 – Dascom 2600 User Guide User Manual
Page 99
Tally Dascom 2610
86
MTPL
IBM
XL24
IBM
AGM
Epson
LQ-2550
Epson
LQ-2170
Code
Function
√
*
*
*
*
<ESC>[<n> v
Set vertical tab
√
√
<ESC>[\<n1><n2>
Perform relative horizontal step
√
<ESC>\<n1>;<n2>
Transparent mode for the characters following
√
<ESC>^
Transparent mode for the character following
√
<ESC>_<n>
Overline ON/OFF
√
√
√
√
<ESC>0
Set line feed to 1/8 inch
√
<ESC>1
Set line feed to 7/72 inch
√
√
√
√
<ESC>2
Set line feed to 1/6 inch
√
<ESC>2
Set line feed to n/72 inch
√
√
√
<ESC>3<n>
Set line feed to n/180 inch
√
<ESC>3>n>
Set line feed to n/216 inch
√
√
<ESC>4
Italics ON
√
√
<ESC>4
Set beginning of form
√
√
<ESC>5
Italics OFF
√
√
<ESC>5<n>
Autom. line feed ON/OFF
√
√
<ESC>6
Print ASCII codes dec. 129 to dec. 159
√
√
<ESC>6
PC character set 2 (expanded)
√
√
<ESC>7
Suppress ASCII codes 129 to 159
√
√
<ESC>7
PC character set 1 (standard)
√
<ESC>a<n>
Select orientation
√
√
√
<ESC>A<n>
Line spacing n/60 inch
√
<ESC>A<n>
Prepare line spacing n/72 inch
√
<ESC>b<m><0>
Clear all tabs
√
<ESC>b<m><n><0>
Set vertical tabs in channels
√
√
√
√
<ESC>B<0>
Clear all vertical tabs
√
√
<ESC>B<n1>...<n16><0
>
Set vertical tabs
√
√
<ESC>B<n1>...<n64><0
>
Set vertical tabs
√
<ESC>c
Reset to initialization status
√
<ESC>c
Setting the horizontal motion index (HMI)
√
√
√
√
<ESC>C<0><n>
Set form length in inches
√
√
√
√
<ESC>C<n>
Set form length in lines
√
√
√
<ESC>d<n1> <n2>
Perform relative horizontal step
√
√
√
√
<ESC>D<0>
Clear all horizontal tabs
√
√
√
√
<ESC>D<n1>...<n32><0
>
Set horizontal tabs
√
√
<ESC><DC2>
Condensed printing OFF
√
√
<ESC><DC4>
Double-wide printing OFF (set with <SO> or <ESC><SO>)