Dascom 2600 User Guide - Manual (Page 102)

Tally Dascom 2610
89
7.2.3 List of available MTPL barcodes
Type Barcode Type Barcode
A* 2/5 Matrix (default) N UPC A (with HRI)
B* 2/5 Industrial O UPC A (without HRI)
C* 2/5 Interleaved P UPC E (with HRI)
D* Code 11 Q UPC E (without HRI)
E* BCD Matrix R* Delta Distance (IBM)
F* Code 39 S Code 128
G* Codabar T EAN 128
H EAN 8 (with HRI) 1) US-Postnet
I EAN 8 (without HRI) 1) KIX Barcode
K EAN 13 (with HRI) 1)
Royal Mail Customer
Barcode
L EAN 13 (without HRI) 1)
USPS Intelligent Mail
Barcode
M* MSI/modified PLESSEY
*These barcodes may be printed out horizontal and vertical, the unmarked only
horizontal.
1) See description on following pages.
The barcode types K, L, N, O may be expanded by using Add-On Barcodes:
Add-On 2 and Add-On 5.
The information to be printed is transmitted in a “bracket” (DC4) A control
sequence (Header) defines the parameters of the used barcode once (e.g. type,
ratio, etc.). If no header is defined, the informaton in the “bracket” will be printed
in Code 2/5 Matrix.
Please note that within the Barcode environment the barcode commands have
priority in case of conflicts with the emulation.
Additional information is provided in the Barcode Programmer’s
Application Manual on this CD-ROM.
7.2.4 US Postnet barcode
Postnet is a special US-American type of barcode. Is printed in character size. Numeric
values from 0 to 9 are printable.
After activating this barcode type, numeric characters from 0 (hex. 30) to 9 (hex. 39) are
interpreted as barcode figures. All other characters terminate the Barcode mode.
Exception: the TAB function (hex. 09) is allowed within Barcode mode. The Postnet
sequence is accessible in every emulation.
The character (e.g. CR = carriage return, hex. 0D), which terminates the
barcode is not printed or carried out. US Postnet barcode does not require
a barcode bracket.
Example:
ASCII ESC [ 1 SP P 1 2 3 4 5 CR
HEX 1B 5B 31 20 70 31 32 33 34 35 0D
The numbers 1 to 5 are printed as Postnet stripes.