Dascom TallyCom III FSL Reference Manual - Manual (Page 28)

FSL Reference Manual for Print Servers
Appendix Section - FSL Commands for IBM 3270 emulation
No. Name Syntax Parameters
75 Overwrite Translate Table %Y75,<n1>[,n2],
<n3>% n1
00-FF = LU3 position in HEX of
character to be translated
n2
1-8 = Symbol set defined in FSL 74
n3
00-FF = Data in ASCII HEX required
to print the character
77 Reset APL Translate
Table %Y77,<n1>% 1-8 = Reset the indicated APL table
78 Select APL Translate
Table %Y78,<n1>% 1-8 = Select the indicated APL table
80 Overwrite APL Translate
Table %Y80,<n1>[,n2],
<n3>% n1
00-FF = The position in HEX of
the APL character to
be translated
n2
1-8 = Symbol set defined in FSL 74
n3
00-FF = Data in ASCII HEX required
to print the character
85 Overwrite Translate Table
in LU1 %Y85,<n1>[,n2],
<n3>% n1
40-FF = LU1 position in HEX of
character to be translated
n2
1-8 = Symbol set defined in FSL 74
n3
00-FF = Data in ASCII HEX required
to print the character
90 User ESC String Definition %Y90,<n1>,<n2>% n1
0 = Erase strings
01-FF = String no. in HEX
n2
'<string>'
= String contents in apostrophe
notation
28