Dovado 4GR - Manual (Page 23)

T h e M o b i le C h o ic e f o r y o u r B r o a d b a n d I n t e r n e t
API 23
© 2013 Dovado FZ-LLC
Stored IDs: 1
>> sms recvtxt 1
From: 46XXXXXXXXX
Sent: 12-07-23 11:27:36
Alphabet: UTF-8
ID: 1
Räksmörgås
End of SMS
>>
4.6.3.2 Reading an SMS via PDU
sms recv [ID] (returns PDU with ID or all PDUs in the inbox if ID is empty [ID:PDU])
You can list all the current PDUs in your in the inbox using: sms recv
This will list all PDUs using in the format ID:PDU where ID is a unique internal descriptor of that
PDU (used for removing PDUs).
Conversion is needed to see the actual contents of the PDU.
Example:
>> sms list
new/total
1/1
Stored IDs: 1
>> sms recv 1
1:07916407970900F1040B91640XXXXXXXF40000217032117263800A
>>
4.6.4 Removing an SMS/PDU
sms del ID
First you need the ID of the PDU you want to remove. It can be obtained using the sms recv
command. Then to remove a SMS/PDU, type: sms del ID
Example:
>> sms list
new/total
0/1
Stored IDs: 1
>> sms del 1
>>
4.7 Home Automation
Tellstick:
ts aliases (lists configured aliases)
ts groups (lists configured groups)
ts turn [alias] [on]/[off]
ts dim [alias] [0...100] (Dimming the device to XX%)
ts dims [alias] [0...100] (Turns the device off before dimming to XX%)
ts dimot [alias] [Start level 0...100] [Stop level 0...100] [Duration xx min]
(Dim from start to stop level over XX minutes)
ts add [alias] [protocol] [house] [channel]
ts add_group [alias] [list_of_device_aliases]