Eberspacher EasyStart Remote+ Operating instructions - Manual (Page 10)

10 | VehiCLe heATeRs – TeChniCAL DOCuMenTATiOn
3 OpeRATiOn AnD seTTing/ADjusTMenT
start display fOllOwiNg actiVatiON Of thE
mObilE uNit
17:30 21 °C
if no menu item is activated, the start display
appears with a flashing heater symbol in the Menu
bar, with the current time and the actual temperature
in the status area.
Other possible actions are:
ƒ heATing iMMeDiATeLy with LOngpRess.
ƒ heATing On with shORTpRess, in addition con-
firm and if applicable set the temperature setpoint
and operating time,
see page 12 .
ƒ select a new menu item.
displays fOr actiVatEd mENu itEms
heATing On
60 min 21 °C
Other possible actions are:
ƒ heATing OFF, see page 11 and 13 .
ƒ select a new menu item.
VenTiLATiOn On
60 min 21 °C
Other possible actions are:
ƒ VenTiLATiOn OFF, see page 16 .
ƒ select a new menu item.
ADD-On heATeR heATing On
90 min
Other possible actions are:
ƒ ADD-On uniT heATing OFF, see page 20 .
ƒ select a new menu item.
ADD-On heATeR VenTiLATiOn On
90 min
Other possible actions are:
ƒ ADD-On uniT VenTiLATiOn OFF, see page 20 .
ƒ select a new menu item.