5 what to do if – Eberspacher EasyStart Remote+ Operating instructions User Manual
Page 32
32 | VehiCLe heATeRs – TeChniCAL DOCuMenTATiOn
5 WhAT TO DO iF …?
DispLAy
DesCRipTiOn
ReMeDy / CusTOMeR
Distance between the mobile unit and
vehicle too large or at the range limit.
Change the position relative to the
vehicle e.g. hold mobile unit higher or
move it to the side. Reduce distance
from vehicle.
Dense buildings between the mobile unit
and vehicle.
Reduce distance. if possible, reinstate
visual contact with the vehicle.
Mobile unit has not been taught.
Teach mobile unit as described in the
installation instruction.
several easystart Remote+ radio remote
controls are being operated simultane-
ously.
Reactivate the mobile unit after a
pause.
DesCRipTiOn
pOssibLe CAuse
ReMeDy
The mobile unit can-
not be activated
battery dead.
Replace battery.
no battery inserted.
insert battery.
battery inserted incorrectly.
insert battery correctly.
LeD indicator of the
button is flashing
stationary unit is in learn mode.
The indicator goes out automatically
after 30 seconds.
Teach mobile unit as described in
the installation instructions.
plEasE NOtE!
if you are unable to remedy the error or fault, please
contact an authorised je workshop or dial the follow-
ing service phone number (
).