BT verve 450 - Manual (Page 35)

Handset priority
1. Press
Menu
, scroll to
Settings
and press
OK
.
2. Scroll to
Base settings
. Press
OK
.
3. Scroll to
H/set priority
. Press
OK
.
4.
All handsets
is highlighted. Press
OK
for all handsets to
ring together.
Or
Scroll to
Select handset
. Press
OK
then press
or to select the handset you want to ring first. Press
OK
.
The ring delay option is highlighted. Press or to set
the number of rings before the other handsets ring. Press
OK
.
5. Press
Back
to return to the previous menu.
Dialling mode
1. Press
Menu
, scroll to
Settings
and press
OK
.
2. Scroll to
Base setting
. Press
OK
.
3. Scroll to
Dial mode
. Press
OK
.
4. Press or to select the dial mode option you want.
5. Press
OK
to save.
6. Press
Back
to return to the previous menu.
35 Settings
If you experience any problems, please call the Helpline on 0800 218 2182* or email [email protected]
When you have more than one
handset registered to your base, you
can set one handset to ring before the
others. This allows one handset user to
answer all incoming first, like a
receptionist.
Choose All handsets if you want all
handset to ring at the same time or
Select handset
to nominate a
handset to ring before the others.
The dial mode options are Tone/Time
Break, Tone/Earth or Pulse/Earth. You
should not normally need to adjust this
setting unless advised to do so.