BT verve 450 - Manual (Page 64)

64
If you experience any problems, please call the Helpline on 0800 218 2182* or email [email protected]
At the base:
1. Press and hold .
The handset is automatically assigned the next available
handset number.
Select base
1. Press
Menu
, scroll to
Settings
and press
OK
.
2.
H/set settings
is highlighted. Press
OK
.
3. Scroll to
Select base
and press
OK
.
4.
Base 1
is highlighted. Scroll or to the base you
want and press
OK
.
5. Display shows ✓
Saved
followed by the standby screen.
De-register a handset
1. Press
Menu
, scroll to
Settings
and press
OK
.
2.
H/set settings
is highlighted. Press
OK
.
3. Scroll to
De-register
and press
OK
.
4. Enter the System PIN (original setting = 0000) and press
OK
.
5.
Select handset!
option is highlighted. Scroll or
to the handset you want and press
OK
.
Using additional handsets
If registration is not successful first
time, please repeat the process again
in case the base registration period ran
out of time.
If there are already 5 handsets
registered to the base, the registration
will fail. You must de-register another
handset before you can register the
new one.
If your BT Verve 450 handset is
registered to more than one base, you
can select which base to use.
If you have a handset registered to
more than one base and then de-
register it from one of them you will
need to re-select which base to use.
Until the base is selected the handset
will display Register.