BT verve 450 - Manual (Page 36)

PBX/switchboard access code
1. Press
Menu
, scroll to
Settings
and press
OK
.
2. Scroll to
Base settings
. Press
OK
.
3. Scroll to
PBX access
. Press
OK
.
4. Enter the code you want, then press
OK
.
5. Press
Back
to return to the previous menu level.
System PIN
1. Press
Menu
, scroll to
Settings
and press
OK
.
2. Scroll to
Base settings
. Press
OK
.
3. Scroll to
System PIN
. Press
OK
.
4. Enter the old PIN (original setting 0000) and press
OK
.
5. Enter the new PIN and press
OK
.
6. Re-enter the new PIN and press
OK
.
7. Press
Back
to return to the previous menu level.
36 Settings
If you experience any problems, please call the Helpline on 0800 218 2182* or email [email protected]
If you enter your PBX access code your
BT Verve 450 will automatically enter a
pause after the first digit if it matches
the PBX access code.
If any existing code is displayed.
Press Clear to delete digits.
The System PIN is used when changing
certain settings and registration / de-
registration. The default setting is
0000. You can change this to your own
preferred 4-digit number.
If you make a mistake, press Clear to
delete digits.