ElmoMC Gold Line Digital Servo Drives-Gold Bell - Manual (Page 31)

Gold Bell Installation Guide Installation
MAN-G-BELIG (Ver. 1.004)
www.elmomc.com
31
4.3.2.5. Connector J1
I/O, LEDs, STO (safety)
For full details on user I/Os, see
Section
4.10.
For full details on STO, see Section 4.8.
Connector Type: 1.27 mm pitch 0.41 mm sq
Pin (J1) Signal Function
1 Reserved Reserved
2 Reserved Reserved
3 INRET1_6 Programmable digital inputs 1–6 return
4 IN1 Programmable digital input 1
5 IN2 Programmable digital input 2
6 IN3 Programmable digital input 3
7 IN4 Programmable digital input 4
8 IN5 Programmable digital input 5
9 IN6 Programmable digital input 6
10 STO_RET Safety signal return
11 STO2 Safety 2 input
12 STO1 Safety 1 input
13 LED_ETHERCAT ERR LED Status EtherCAT ERR
14 LED_ETHERCAT RUN LED Status EtherCAT RUN
15 OUT2 Programmable output 2
16 OUT1 Programmable output 1
17 OUTRET2 OUT 2 return
18 OUTRET1 OUT 1 return