Chapter 3: installation, Before you begin, Site requirements – ElmoMC AC Input Digital Servo Drives-Bassoon User Manual
Page 15: Hardware requirements, Chapter 3, Installation, Site requirements 3.1.2. hardware requirements
Bassoon Installation Guide
MAN-BASIG (Ver. 1.502)
15
Chapter 3:
Installation
The Bassoon must be installed in a suitable environment and properly connected to its voltage
supplies and the motor.
3.1. Before You Begin
3.1.1.
Site Requirements
You can guarantee the safe operation of the Bassoon by ensuring that it is installed in an
appropriate environment.
Feature
Value
Ambient operating temperature
0 °C to 40 °C (32 °F to 104 °F)
Maximum operating altitude
2,000 m (6562 feet)
Maximum relative humidity
90% non-condensing
Operating area atmosphere
No flammable gases or vapors permitted in area
Models for extended environmental conditions are available.
Caution:
The Bassoon drive dissipates heat by natural convection. The maximum
operating ambient temperature of 0 °C to 40 °C (32 °F to 104° F) must not be
exceeded.
3.1.2.
Hardware Requirements
The components that you will need to install your Bassoon are:
Component
Connector Described
in Section
Drawing
Main Power Cable
Power
Connector
Motor Cable
Power
Connector
Auxiliary Power Cable
J4