Eschenbach Optik iFlex - Manual (Page 17)

iFlex User Manual Rev 1.0 English
- 17 -
down to avoid glare from bright paper. This
control does not appear on the menu when using
an external video source.
Phase: The phase control appears on the
menu when displaying external computer
video. It controls the alignment of the pixels
from line to line. It must be adjusted so that
any jitter, blurring or streaking is minimized.
Advised input signal: 1024 x 768 @ 60Hz.
6-2. The Button Functions Menu
The three function buttons on the front
panel and the footswitch can be
programmed to perform one of six possible
functions, or they can be disabled to prevent
accidental changing of settings.
BUTTONS
->
->
->
->
Figure 8