Eschenbach Optik iFlex - Manual (Page 30)

iFlex User Manual Rev 1.0 English
- 30 -
10. Maintenance
10-1. Changing the Lamps
If either of the lamps begins to dim or fails to
start, they will need to be changed. You should
replace both lamps at the same time to maintain
a good image.
Before starting to replace the lamps you must
unplug the power cord from the back of the unit.
Figure 12
You will require a small crosshead screwdriver to
unscrew the lamp covers, see figure 12 & 13 to
follow the sequence of operations.