ETC Congo Family v6.4.0 - Manual (Page 172)

170
Sensor3 & Sensor+ Dimmer Feedback (6.2)
These devices will show up in the “Net3/ACN Device List” (Browser >General Settings
>Network >Net3/ACN Device List).
Channel Display
When a channel is patched to an output that is associated with a Sensor3 or Sensor+
dimmer then that channel will indicate the state of that dimmer.
When the associated dimmer has an error or warning then the channel display will include a
small warning sign as part of the display.
If a channel is selected, the number of active dimmer errors for the channel will be shown in
the Info box below the Browser.