ETC Congo Family v6.4.0 - Manual (Page 900)

898
Master control functions
DESCRIPTION SYNTAX
Activate the Master View* [MASTER]
Open the Master Editor. [MODIFY] &
[Master_Key]
Set an individual flash level (in flash mode) [#] [FLASH_MODE] &
[Master_Key]
Toggle a master on/off [START] &
[Master_Key]
Toggle master # on/off [#] [START]
Fade a master to a specific level [#] [START] &
[Master_Key]
Hold FLASH MODE and press master keys to
toggle modes. Use PAGE +/- to select functions. [FLASH_MODE] &
[Master_Key]
Connect a master playback to the Master
playback [CONNECT] &
[Master_Key]
Tap tempo for sequence on a master (hold tap
and tap Master key). [TAP] & [Master_Key]
*You can also click on the Master View node in the Browser.