Cleaning the reflector – ETC Source Four XT HID Zoom User Manual User Manual
Page 17
15
Cleaning the reflector
To quickly clean the reflector, remove the lens tube and clean the dust from the reflector with a blast
of oil-free air. You may also wipe the reflector with a clean lint-free cloth. If either method is not
sufficient, follow these steps. Refer to
.
Step 1:
To protect the lamp during cleaning, remove the lamp assembly. Refer to
.
Step 2:
Remove the barrel.
Removing and Installing the Barrel, page 7
Step 3:
Remove dust with a blast of oil-free air or wipe with a clean, lint-free cloth. Isopropyl
alcohol, distilled water or a 50%-50% mixture of each can be used to clean the glass
surface.
Step 4:
Gently wipe the reflector.
Step 5:
Reinstall the barrel.
Step 6:
Reinstall the lamp assembly.
W A R N I N G :
Disconnect power and allow the lamp to cool down before attempting to
clean the reflector.