ETC Source Four Mini LED - Manual (Page 7)

4 Source Four Mini LED User Manual
Locking the rotation in the canopy and track-mount variations
Step 1: Rotate the fixture into the desired position. Fixture will be prevented from
rotating completely around to protect the wiring.
Step 2: Insert a 1.5mm Allen wrench into the small hole on the yoke lock.
Step 3: Turn wrench to tighten down the yoke lock.
Focusing the beam
Step 1: Loosen the beam
focus knob located
under the barrel. Do
not remove the knob.
Step 2: Slide the lens tube
forward or backward to
achieve the desired
beam edge.
Step 3: Once the fixture is
focused, tighten the
beam focus knob.
N o t e : If installing with LSI ( http://www.lightingservicesinc.com/ ) or
Global ( http://www.nordicaluminium.fi/en/index.htm l ) track,
please reference the manufacturer's website for installation
instructions.
Yoke lock
Beam focus knob