Basic assembly, Luminaire information, Basic assembly luminaire information – ETC Source Four PAR CE User Manual
Page 5: Wiring and power information

3
English
Basic Assembly
Luminaire information
Wiring and power information
A plug of at least 2.5 amp (220/240V) rating should be attached to the luminaire’s mains lead. The
wires in the mains lead are 1.55mm
2
each and coloured in accordance with the following code:
Green and Yellow:
Earth
Blue:
Neutral
Brown:
Live
Current rating:
240V/2.5 amp maximum
Operating frequency:
50/60 Hz
W A R N I N G :
Please note the following safety warnings before use:
Do not mount the luminaire on or near combustible surfaces.
Do not operate the luminaire without a lens installed.
Always hang the luminaire with the color frame retaining clip in the locked
position.
W A R N I N G :
This luminaire must be earthed.
WA
RNING
!
WA
RN
ING
!
Figure 1
Yoke locking knob
Lens
Lamp
housing
Yoke
Lens rotating ring
Colour frame holder
Safety screen
Lens catcher
Gel retaining clip
Tabs
Colour frame
Earth continuity cable
t 180°c