ETC Unison Mosaic Show Control - Manual (Page 14)

14
TPC
TPC INSTALLATION
The Mosaic Tessera Panel Controller (TPC) is a fully fledged Controller in its own right with an
integrated touch screen user interface. It can also share its user interface with other Mosaic
Controllers when operating as part of a system across an Ethernet network.
The units are designed to be permanently installed into UK double-gang or custom back boxes
(supplied separately). The units are 100% solid state and have been qualified to operate in a dry
environment within a temperature range of 0°C to 50°C (32°F to 122°F).
The following drawing illustrates a typical installation:
BACK BOX: 35mm (1.5”) or deeper, remove or
bend flat the top and bottom tabs if present
BEZEL & ELECTRONICS: Mounts flush to the wall,
ensure that the back box cutout is not oversized
Carefully remove the protective films from the front of the liquid crystal display and the
magnetic overlay before final assembly.
TPC LAYOUT
The following drawing illustrates the layout of a Mosaic Tessera Panel Controller (shown with
overlay removed), refer to the following sections for details: