ETC Unison Mosaic Show Control - Manual (Page 22)

• DMX Input
A USITT DMX 512 compatible input is provided on a standard 5 pin male XLR connector
with the following pinout:
1: Shield
2: Data - (‘Cold’ or ‘Complement’)
3: Data + (‘Hot’ or ‘True’)
4-5: Not connected
The DMX input port is optically isolated from the MSC X’s electronics and ground
connection which is the recommended configuration for a DMX receiver.
• IEEE 1394 (2)
Port 1 supports standard IEEE 1394 (aka Firewire) and may be used to connect a Digital
Video (DV) input source, for example a camera for live input.
Port 2 is not supported at the time of writing (refer to the current Designer Help).
• USB 2.0 Host
This port is not supported at the time of writing (refer to the current Designer Help).
NOTE: Ports and third party equipment can be damaged when plugging or
unplugging an energised system (hot-plugging). It is therefore advisable to
remove power before making or breaking port connections.
22
X