ETC Unison Mosaic Show Control - Manual (Page 24)

24
AVC INSTALLATION
The Audio Visual Controller (AVC) is designed to be permanently installed in a
central control room/cupboard or DIN consumer unit for remote deployment. The enclosure
and mounting complies with DIN43880 and EN60715 (35/7.5 rail) respectively.
The unit is 100% solid state and has been qualified to operate in a dry environment within a
temperature range of 0°C to 50°C (32°F to 122°F). Sealed IP65 rated consumer units are
available for outdoor use, please consult your ETC distributor or representative.
Since the unit requires no user intervention once installed it is suitable for remote installation
with all configuration and management taking place over an Ethernet network. However it is
recommended that access can be gained in the unlikely event of a hardware failure.
AVC LAYOUT
The following drawing illustrates the layout of the Unison Mosaic Audio Visual Controller, refer
to the following sections for details:
Unison Mosaic
AVC
AUDIO/VIDEO OUTPUTS RS232/485 PORT
AUDIO/VIDEO INPUTS ETHERNET
DC INPUT
(9-48V)
USB
RESET
STATUS
LEDS