Fulltone FullDrive2-Mosfet - Manual (Page 2)

2006 FMP Inc. All Rights Reserved
Suggested settings:
SRV style
Volume Knob= 1 O’clock
Tone Knob= 3 O’clock
Overdrive Knob= 3 O’clock
Boost knob= 1 O’clock
Vintage Mode on the left mini-toggle
Standard Mode on the right mini-toggle
Pristine Fat and Single note
Volume Knob= 10 O’clock
Tone Knob= 2 O’clock
Overdrive Knob= 1 O’clock
Boost knob= 9 O’clock
FM Mode on the left mini-toggle
Mosfet Mode on the right mini-toggle
You get Sparkling tones in Overdrive Mode.(left LED only lit) and the ability to toggle between two
Incredibly useful, yet vastly different sounds by kicking On and Off the Boost Mode via the right footswitch!
Rock
Volume Knob= 11 O’clock
Tone knob= 2 O’clock
Overdrive knob= 9 O’clock
Boost Knob= 5 O’clock
Vintage Mode on left mini-toggle
Mosfet Mode on right mini-toggle
DC Power Options!
Your pedal ships with a 9 volt battery installed, use any available 9 volt except rechargeable types. Use a REGULATED 9-volt DC power Supply like the
Fulltone FPS-1 or a professional quality multiple pedal power such as the Voodoo Labs Pedal power.
You may run this pedal anywhere between 9 and 18 Volts DC as long as the center Pin is Negative...You'll be amazed at the sonic differences! But please
make sure that you use a REGULATED quality power adapter…not a Radio Shack or similar .
WARNING! Damage resulting from the use of ANY power supply other than Fulltone FPS-1 is not covered by warranty...period! We are seeing many
pedals (not just Fulltones) burnt up by people using the wrong power supplies.....AC=Alternating Current, DC=Direct Current!…you CANNOT put AC
(example:Line 6 type adapters!) into a pedal that requires 9-18volts DC like the FD2-Mos!
To access 9 volt battery: unscrew the four rubber feet and pull the housing apart. When reinstalling never over-tighten the rubber
feet, only use your fingers to tighten and you won’t even need a screwdriver.
Warranty Fulltone products carry a Limited 5 year Warranty to the original owner with proof of purchase that the product was bought from an Authorized
Fulltone Dealer. There is no need to register your product, simply keep a copy of your original sales receipt. The Warranty covers failure due to manufac-
turing errors only and is void if any mod or repair is performed by anyone other than Fulltone AND/OR if we deem that any operator-caused abuse or
damage has occurred, for example; the use of an incorrect power supply, a dropped pedal, water damage, etc. Batteries are not Warranty-covered and
Customer is always responsible for all shipping costs both to and from Fulltone. Do not attempt to call Fulltone, instead, all Repair issues are handled by
an email ([email protected]) to troubleshoot the possible problem and (only after troubleshooting) for the scheduling of Warranty Repair. After we have
deemed that a repair is necessary, we will email you an Acrobat PDF copy of our Return Authorization Form (RA Form) and you will print it out, fill out all
information, and include it with the device you are sending. Fulltone Musical Products Inc. is not responsible for and injuries and/or damages related to
the use of our products
Fulltone Musical Products Inc.
11018 Washington Blvd. Culver City, CA 90232
310-204-0155 fax 204-0156
http://www.fulltone.com email: [email protected]
Page 2
MOSFET