Cable restraint information – Gamber-Johnson 7160-0526-xx User Manual

Page 6

Advertising
background image

14 AWG (black wire) J1128 TYPE GPT

Panduit #BSN14-C
Butt Splice connects to
black lead from dock

Panduit #BSN14-C
Butt Splice connects to
red or blue lead from dock

Vehicle Battery

Ground to Vehicle Chassis

Connect in-line fuse holder to lead

wire using Panduit #BSN14-C

Butt Splice connectors

14 AWG (red wire) J1128 TYPE GPT

Support Bracket

Figure 3

Page 6of 8

CABLE RESTRAINT INFORMATION

supplied in the hardware bag.

the cables with the additional tie wrap anchors

Support Bracket, remove the bracket and restrain

the USB or Ethernet cables do not fit with the

Bracket using the supplied cable ties (Figure 3). If

Retain the USB and Ethernet cables at the Support

Attach cable ties to the anchors as shown (Figure 3).

the locations shown (Figure 3).

underside of the dock by pushing into the holes in

Attach the supplied cable tie anchors to the

Figure 2

-

+

10"

Fuse

USB/Ethernet

Assemble cable ties to the

anchors and route cables

as required

Advertising
This manual is related to the following products: