General Machine Products 89950 JetStream Cable Blowing Machine - Manual (Page 4)

Page 4
General Machine Products Co., Inc .
Service Schedules
Apart from the daily jobs, the schedules are based on machine running hours. Keep a
regular check of hours in use. Do not use a machine which is due for a regular service.
Rectify any defects found during regular maintenance before clearing the machine for
use.
WARNING
Maintenance must be done only by suitably qualified and competent persons. Before
doing any maintenance, make sure the machine is safe and correctly situated on level
ground.
Daily
 Clean machine generally. Clean the machine using water and/or steam. Do not al-
low mud to build up on tire engine. Make sure that the air inlets on the hydraulic
cooler are not clogged.
Check
 Generally for damage
 Hydraulic fluid level
 Engine oil level
 Hydraulic couplings
 Hydraulic hoses
Note: Check tightness of nuts, bolts, screws and hose fittings after the first days opera-
tion and thereafter in accordance with Service Schedules.
Note: The engine oil should be replaced after the first three days operation and thereaf-
ter in accordance with the Maintenance Schedules
Every 50 hours or 3 Months
Do the Daily jobs plus:
Clean
 Air cleaner elements.
(See Engine Manufacturer's Handbook)
 Engine oil filter
Change
 Engine oil
 Hydraulic filter
 Hydraulic oil
!