General Machine Products 89950 JetStream Cable Blowing Machine - Manual (Page 7)

Page 7
General Machine Products Co., Inc .
Note: It is important that after maintenance, the tubular frame is restored to its operat-
ing position and that the clips A are securely fitted.
Note: When the machine is to be lifted using the balanced lifting point C, it is important
to ensure that the clips A are in place and securely fitted.
TROUBLESHOOTING GUIDE
Engine Will Not Start

Check gas level

Check throttle in "on" position

Check emergency stop button is "reset" on either the Tornado or the Powered Duct
Rod Pusher

Ensure hoses are connected from power pack to blower (if they are not connected or
have a faulty coupling, engine will not turn over).

Contaminated gas
Difficult to Start Engine

Check above points

Ensure gas has additional additive

Engine may be flooded

Check hydraulic valve on blower unit is switched “off”

Check spark plug
Engine is Running Erratic

Ensure additive is mixed with gas

Damage to throttle
SPARES
For spare parts always provide the part number and serial number.
General Machine Products Co.
3111 Old Lincoln Highway, Trevose PA 19053 USA
TEL: +1 215 357 5500 ● FAX: +1 215 357 6216 ● E-MAIL: [email protected]
Website: www.GMPtools.com
Please give as much information as possible to ensure correct identification and
supply of spare parts