General Machine Products 89009 Compressor Aircooler - Manual (Page 5)

Page 5 of 16 General Machine Products Co., Inc.
13) Wear ear defenders if noise levels are considered high to prevent ear dam-
age
14) The machine must be operated on firm ground.
15) Stay clear of pipes under pressure and cables or lines under tension.
16) Only use the machine for its intended purpose.
17) Avoid using the machine in air born dust environments.
18) Ensure that the compressed air hoses are connected correctly, hot air from
the compressor entering the pipe marked input, the cool air to the blowing ma-
chine to the pipe marked output.
19) Ensure that Air Hoses are laid out as straight as possible to avoid problems
when pressurized.
20) Personnel should only approach the aftercooler when in operation wearing
suitable eye and body protection.
21) Check that all the cam and groove air hose couplings are fully locked, and
the securing clips are fitted before pressurizing the air hoses.
22) Do not unlock the hose cam couplings while the aftercooler is pressurized.
23) The air pressure should not exceed 12 bar (175 P.S.I.)
24) No servicing or maintenance work is to be carried out while the aftercooler is
pressurized.
25) Before carrying out any servicing or maintenance work it is advisable to al-
low the Aftercooler to cool down.