General Machine Products 89016 Trailer Mounted Cable Fleeter 1/2" x 10,000' - Manual (Page 6)

Page 6 of 16
WARNING
The principle of operation and storage rate has been designed for major cable types.
However, account should be made for miscellaneous cables, which have characteris-
tics that do not always meet this standard. This may affect the volume of cable
stored or the machine may have to be run at lower speeds.
This could be curved cables, extremely soft cables or non-symmetrical cables. The
operator must establish the correct speed of operation and loading for the cable types
being employed.
It is recommended that this should be assessed by trial on your particular cable prior
to site operation.
2.2 Components
The Cable Fleeting device consists of the following major assemblies:
(A) Cable storage cassette
(B) Rotating Cable Guide Carousel
(C) Fixed Cable Guide Quadrant
(D) Duct Clamp (uses Tornado duct clamp)
Note: One duct clamp included with fleeter and must be specified at the time of
purchase. 3/4-1 1/4” duct clamps available.
A
B
C
D