General Machine Products 70605 Trailer Mounted Fiber Optic Puller - Manual (Page 13)

Page 13 of 24 General Machine Products Co., Inc.
6.2 MONTHLY MAINTENANCE
This should be carried out at intervals not exceeding 4 weeks. These intervals will de-
pend upon the degree of use of the winch.
6.2.1
Carry out all the pre-winching checks as detailed in 6.1
6.2.2
Check the function of all the lighting equipment, this should be more frequent if regular
problems arise.
6.2.3
Check and adjust the tire pressures.
6.2.4
With the engine and drum shaft running, check the return filter condition indicator. This
is a red/green indicator mounted on the hydraulic oil tank return line filter. If the indica-
tor is well over into the red area, replace the filter.
6.2.6
Grease all bearings and grease fittings.
6.2.7
Oil all moving parts to prevent corrosion.
6.2.8
Apply oil to all oilite bushes.
6.2.9
Check the condition of the towing breakaway chain. If damaged, replace immediately.