General Machine Products 70605 Trailer Mounted Fiber Optic Puller - Manual (Page 14)

Page 14 of 24 General Machine Products Co., Inc.
6.3 ANNUAL SERVICING
This should be carried out at approximately 12 monthly intervals by a qualified and
experienced workshop team.
6.3.1
Carry out all the work as specified above in section 6.2
6.3.2
Drain the hydraulic circuit of oil. Clean the filler/breather and replace. Renew the suc-
tion filter element and return line filter element. Refill with fresh oil. Check and reset
all relief valves, (Refer to section 6.4 for further information).
Refer to section 4 for grades of hydraulic oil.
6.5.3
Service the engine as per the engine manufacturers manual supplied with the winch.
6.5.4
Check the condition of the tires, and running gear. Adjust and reset if necessary.
6.5.5
In-line planetary gearbox (capstan drive):
Change the gearbox oil, (refer to section 4 for gear oil grades) refer to the instruction
manual supplied with the gearbox for further details on maintenance and servicing.