Great Northern Popcorn 7976 Frosty Keg Kegerators - Manual (Page 9)

Copyright 2011 DTX International
9
Proper installation of your CO regulator and a
thorough understanding of CO canisters is
essential to the safe use of this product. Review
and follow instructions for handling CO cylinders
and this section in particular to ensure your
safety and the safety of others.
CO canister is shipped to
you EMPTY for safety reasons. You will need to
get this canister filled before you can use your
unit. In most places you can get canisters filled
at:
stores that sell kegs
party stores or convenience stores
fire and welding supply stores
Ensure that the safety devices for your pressurized system are installed and remain installed. Once installed,
remove the rubber washers in the regulator attachment nut to the canister or in the tap mechanism.
bypass
these safety features.
To install the dual-gauge regulator onto the CO canister:
Ensure the white vinyl washer is in place within the regulator
fitting. This should already be factory installed. (
)
2. Next, loosen the pressure gauge on the regulator by turning the red
knob all the way to the left. You may need to use the allen wrench
provided to loosen the knob by turning the small set screw on the
bottom of the knob.
2
2
2
.
2
2
NEVER CONNECT A CO CANISTER
DIRECTLY TO THE UNIT! To avoid potential
explosion that could result in grave injury or
even death, ALWAYS CONNECT THE
CANISTER TO THE CO REGULATOR.
SPECIAL PRECAUTIONS
NEVER
NEVER
Failure to comply will void your warranty and could result in serious injury or death!
Figure B
2
2
IMPORTANT! Your
1.
DO NOT ATTEMPT TO REFILL CO CANISTERS YOURSELF!!
DANGER! Carbon dioxide is a potentially dangerous gas. Canisters or cylinders are under pressure
and proper handling is essential for safety. ALWAYS HANDLE WITH CARE!
2
CO
2
KEGERATOR ASSEMBLY
CO REGULATOR INSTALLATION
2
Figure A
Figure B
Figure B