iCreation i-700 - Manual (Page 47)

Notes:
When you place the handset (DECT phone) on the base, it
automatically turns on.
(when it's off), press .
, press until " " appears.
To turn on the handset
To turn off the handset Goodbye!
46 15
Replace batteries if they don't recover their full storage
capacity after recharging.
When replacing the batteries, always use high quality Ni-MH
re-chargeable batteries. Never use other types of batteries.
Notes:
Charging
Before initial operation, fully charge
the DECT phone for 15 hours or more.
To charge the DECT phone or iPhone,
simply place it on the base.
When charging, the bars in scroll.
You can adjust the visual angle of the iPhone according to
your needs (from 30 degrees to 75 degrees).
Nothing appears on the screen when the battery power is
very low. Fully charge the handset before use.
Note:
DECT Phone & iPhone
Turning On or Off the Phone
Chapter 7: Settings
Changing the Handset & Base PIN
Base and handset PINs are required to protect your phone
against unauthorized use. They are set to
at the factory.
You can change the PINs as follows:
1590
Press to display the main menu items.
Press to choose , then press .
Press to choose .
Enter the current PIN code, then press .
Enter the new four-digit PIN, and press .
Enter the new PIN code again to confirm it, then press
to save the setting.
Menu
Select
Select PIN code
OK
OK
OK
beneath
beneath
beneath
beneath
beneath
beneath
1
2
3
4
5
6
Handset PIN
At step 4, if you enter the wrong PIN, your phone generates
a warning sound.
Note:
Handset