INFICON CU1000 Control unit - Manual (Page 13)

Installation 13
5 Installation
5.1 Connecting the control unit
 Data cable
 Mass spectrometer module installed.
1 Connect data cable to C ONTROL U NIT of the MSB box.
2 Connect data cable to L D .
Information The data cable to the control unit can also be connected or
disconnected during operation.
3 If needed, connect headphones or speakers to .
5.2 Installing the control unit
 Recess for the control unit integrated in the test system.
► Push the control unit into the recess and screw it tight.
► Remove protective foil from display.
Hearing damage from loud volume setting
Loud volume setting can damage hearing.
► Do no set volume of headphones too loud.
Fig: 3 Dimensions - control unit